IPTS
Test Stand

max. capacity 5 N, 20 N oder 50 N
Test stand for measuring peeling force of SMD-packages, emboss tapes, adhesive films, stickers, protection foils, first-aid tapes etc. with high sampling rate based on different standards:

IPTS-5N : IEC 60286-3:2013 and JIS C0806-3:2014

IPTS-20N/-50N : ISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999

Desktop-device with integrated load cell and digital output signal for data processing with a PC

Special Features

  • 2 operation modes:
    real time – display the actual peeling strength
    peak force – to measure the peak force during a testHigh sampling rate of 2000 times/sec
  • Easy to read OLED display
  • Infinitely adjustable peeling angle 165 – 180 degree
  • 5 adjustable travel speeds: 120, 200, 300, 500, 1000 and 1500 mm/min
  • Test stand IPTS has an adjustable setting screw to define stroke
  • Well mounted carriage: Low mechanical vibration during measurements (0.1 % FS under condition of no attachment and load)
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG)
  • USB output signal for fast data transfer to a PC (2000 values/sec.)
  • Special software Force Recorder Standard for recording load curve and readings

Standard Features

  • User switchable units: N, gf, and ozf
  • Display update time 10 times/sec
  • Exact measuring with an accuracy of 0.2 %
  • »Zero Set« to zero the gauge (weight compensation for clamp)
  • Overload stop function (150 % full scale) to decrease the damage of the sensor
  • Immediately aborting the measurement by emergency switch
  • Mains operation

 Available Models

Model Capacity
in N		 Resolution Capacity
in gf; kgf		 Capacity
in ozf; lbf		 Standards
IPTS-5N 0 – 5 N 0.001 N 0 – 500.0 gf 0 – 18.00 ozf IEC 60286-3:2013 and JIS C0806-3:2014
IPTS-20N 0 – 20 N 0.01 N 0 – 2.000 kgf 0 – 4.409 lbf ISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999
IPTS-50N 0 – 50 N 0.01 N 0 – 5.000 kgf 0 – 11.02 lbf ISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999

SPECIFICATIONS

Capacity: Max. 5 N, 20 N or 50 N
Resolution: 0.001 N
Accuracy: ±0.2 % Full Scale, ±1 digit
Stroke: Travel distance of load cell: approx. 400 mm
Peeling length: approx. 200 mm
mechanical adjustable set points with stop function
Width of adherend: Max. 88 mm
Sample width: IPTS-5 N: clamp for pull 40 mm, clamp for hold 95 mm
IPTS-20N/IPTS-50N: clamp for pull 20 mm, clamp for hold 50 mm
Opening width: IPTS-5 N: clamp for pull 0.5 mm, clamp for hold 0.5 mm
IPTS-20N/IPTS-50N: clamp for pull 3 mm, clamp for hold 13 mm
Travel speed: 120, 200, 300, 500, 1000, 1500 mm/min
Peeling angle: 165 – 180 degree, infinitely adjustable (angle according to hight)
Measuring units: N, gf, ozf (switchable)
Display: OLED, 4-digit
Overload protect: 150 % Full Scale, LED blinks and buzzer warns at 110 %
Memory: Flash memory for max. 1000 values; recallable peak – tension
Setpoints: Programmable Max/Min setpoints with color-coded indicators
Output signal: USB
Temperature range: 0 – 40 °C
Air humidity: 20 – 80 % RH, max.
Power supply: 100 – 240 V AC
Dimensions: 765 x 300 x 90 mm (LxWxH)
Weight, net: Approx. 11 kg

Specifications subject to change without notice!

STANDARD ACCESSORIES

SW-22 – Force Recorder Standard

Additional functions in comparison to Force Recorder Light:
5 graphs at maximum can be displayed in a table
Requirements: Microsoft Win 7/8/8.1/10
Order number: SW-22

 

 

 

 

 USB Connecting Cable

Cable for the USB output to connect the test stand to a PC.

 

 

 

 

 

 

DELIVERY INCLUDES

Test stand IPTS with load cell, film fixture, software Force Recorder Standard, USB cable manufacturers inspection certificate and operating instruction in English

DOWNLAODS

PRODUCT VIDEOS