TT-QCM
Torque Wrench Tester

The TT-QCM Torque Tester is designed for verification and calibration of a wide range of torque wrenches and torque tools. Its benchtop design is perfect for testing; click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic*.

The TT-QCM Torque Tester is designed for verification and calibration of a wide range of torque wrenches and torque tools. Its benchtop design is perfect for testing; click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic*.
A large LCD display with easy to navigate menu allows for quick setup. Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the RS232 interface (cable optional). High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, it can be switched by the operator after purchase.

*Power tools require the use of a run-down-fixture
**Not for use with impact tools or torque multipliers

Also know as the AWS-QCM

 Torque Ranges

Model Range Drive Size Run-Down
Fixture
TT-QCMIO-10*
1 – 10 ozf-in
 1/4″ Included
TT-QCMIO-50*
5 – 50 ozf-in
 1/4″ Included
TT-QCMIO-100
10 – 100 ozf-in
 1/4″ Included
TT-QCMIO-200
20 – 200 ozf-in
 1/4″ Included
TT-QCMI-10
1 – 10 lbf-in
 1/4″ Included
TT-QCMI-25
2.5 – 25 lbf-in
 1/4″ Included
TT-QCMI-50
5 – 50 lbf-in
 1/4″ Included
TT-QCMI-100
10 – 100 lbf-in
 1/4″ Included
TT-QCMI-150
15 – 150 lbf-in
 1/4″ Included
TT-QCMI-250
25 – 250 lbf-in
 3/8″ Included
TT-QCMI-500
50 – 500 lbf-in
 3/8″ Included
TT-QCMI-750
75 – 750 lbf-in
 3/8″ Included
TT-QCMI-1000
100 – 1000 lbf-in
 3/8″ Included
TT-QCMF-100
10 – 100 lbf-ft
 1/2″ Optional
TT-QCMF-150
15 – 150 lbf-ft
 1/2″ Optional
TT-QCMF-250
25 – 250 lbf-ft
 1/2″ Optional
TT-QCMF-500
50 – 500 lbf-ft
 3/4″ Optional
TT-QCMF-600
60 – 600 lbf-ft
 3/4″ Optional
TT-QCMF-750
75 – 750 lbf-ft
 3/4″ Optional
TT-QCMF-1000
100 – 1000 lbf-ft
 1″ Optional
TT-QCMF-2000
200 – 2000 lbf-ft
 1″ Optional

*For 10 & 50 in-oz accuracy is +/-1% from 10-100% of capacity

 Dimensions

 

FEATURES

  • Includes NIST-Traceable Calibration Certificate
  • ±0.5% Accuracy of indicated reading from 10-100% of the capacity (Bidirectional), ±0.25% Optional
  • 3 modes of operation: Track, Peak and 1st Peak
  • Eight (8) selectable engineering units: Oz.in., Lb.in., Lb.ft., Nm, cNm, KgfCm, gfCm, Kgfm
  • NiMH rechargeable batteries provide 8-10 hours continuous use
  • 999 Reading Data Memory
  • RS-232 Data Output (requires optional cable / software)
  • 200% Full Scale bi-directional Overload Protection*
  • For Testing According to ISO 6789:2017

SPECIFICATIONS

Calibrated Range 10-100% Full Scale, bi-directional
Accuracy ±0.5% Accuracy of indicated reading from 10-100% of the capacity (Bidirectional), ±0.25% Optional
Resolution 4 Active Digits
Overload Protection 200% Full Scale bi-directional (except TT-QCMF-2000)
Operating Modes Track, Peak, 1st Peak
Filtering Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz
Data Output RS-232 (requires optional cable / software)
Memory 999 Readings
Alarm Limits Panel Mounted LED for Visual Alarm Limits
Power Internal NiMH battery, AC Adapter / Charger (included)
Weight Aproximately 3lbs depending on transducer
Operating Temp 32 – 120 °F (0-50 °C)
Warranty 2 Years
Calibration Certificate Includes NIST Traceable calibration certificate with data
Standard Accesories Joint Simulator for 1/4″ & 3/8″ drives, AC adapter/Charger
Optional Accessories Joint Simulators for 1/2″, 3/4″ & 1″ Transducers

DOWNLOADS

TT-QCM Instruction Manual