PLT-5000
Combination Contact and Non-Contact Laser Tachometer

The PLT-5000 Pocket Laser Tachometer accurately measures RPM and Surface speed using contact or non-contact measurement techniques. This battery-powered unit is extremely compact for convenient portable use and is supplied in a rugged and attractive plastic housing that is ergonomically designed for optimum comfort.

The PLT-5000 Pocket Laser Tachometer accurately measures RPM and Surface speed using contact or non-contact measurement techniques. This battery-powered unit is extremely compact for convenient portable use and is supplied in a rugged and attractive plastic housing that is ergonomically designed for optimum comfort.
When measuring RPM in the non-contact measuring mode, the PLT-5000 emits a precision laser beam that is aimed at a small piece of reflective tape, which is affixed to the rotating target.

The PLT-5000 is extremely easy to operate and quickly converts from non-contact operation to contact operation by screwing the contact adapter in place. In addition to RPM’s, a wide variety of engineering units for surface speed and length are user-selected via the front panel buttons. Units include; feet per minute, meters/min, yards per minute, inches per minute and more.

A built-in memory stores up to 10 measurements plus minimum, maximum, average and last.

 Complete Kit

The PLT-5000 comes as a complete kit with storage case, 6″ circumference wheel, Funnel Adapter, Cone Adapter, Contact Adapter, three (3) AA Batteries, reflective tape, NIST certificate and instruction manual.

 

 

 

 

 

 

 

 

 

 

Item Descrıptıon
PLT-5000
Combination Contact / Non-Contact Laser Tachometer – PH-200LC
Accessorıes
ISO-17025-TS
ISO-17025 Certificate for Tachometer or Stroboscope
DTCA
Cone Tip for Hand-held tachometers
DTFA
Funnel Tip for Hand-held tachometers
DTSX
Shaft Extension for Tachometers, 3 inch
DT6
6 Inch Circumference Tachometer wheel, 7mm shaft (FPM-6)
205T
Reflective Tape, 1×7 Inch Strip – TAPE
205TS
Reflective Tab Sheet, 35 1/2″ x 1/2″ Squares – TAB
205TS-4
Qty 4 Reflective Tab Sheet, 35 1/2″ x 1/2″ Squares
65-29
Reflective Tape, 1/2″ x 5′
PLT-5000-ADAP
Spare Screw-In Contact Adapter for PLT-5000
PLTCC
Carrying Case for PLT-5000 Tachometer
FPHB4922370
PLT-5000 MT / PH Battery Cover

FEATURES

  • Supplied with Traceable calibration certificate
  • Sharp Visible Laser Beam
  • 60″ Range
  • Measures RPM & surface speed and length
  • Stores 14 readings for recall
  • Displays Metric & English length units
  • Simple One Button Operation

SPECIFICATIONS

Display 5 digit 0.47″ (12mm) height LCD
RPM Measuring Range Non-Contact; 6.0 – 99,999
Contact, 6.0 – 20,000 (limited for safety reasons)
Accuracy Revolution 6.0-599.9 rpm ±1rpm, 600-99,999 rpm ±0.006% & ±0.5 digit
Resolution 0-9999.9 – 0.1 RPM
<10,000 – 1 RPM
Surface speed 6″ Wheel (m/min) 1.0-3,810, (yards/min) 1.0-4,166.4
(inch/min) 36-99,999 ( feet/min) 3.0-12,499
Length- ( Using 6″ wheel) (M) 0.2-99,999-(yards) 0.2-99,999 -(feet) 0.5-99,999
Total RPM 1-99,999
Surface speed, length 0.4% and ±1 digit
Memory 14 Reading are stored in memory and retained for five minutes
( Last, Max, Min, average, and 10 selectable measurements.)
Update time One Second
Detection Laser Diode
Laser Wavelength 650 nm
Laser Power < 1mW
Laser Class II
Auto Power Off 5 Minutes
Batteries Included 3 AA 1.5V
Low Battery Indicator Flashing “LO BAT” in display
Over Range Indicator Flashing “OVR” display
Operating Temperature 32-110F (0-45C)
Case construction ABS Resin
Dimensions 4.55″ L x 2.52″ W x1.24″H (115.5 mm x 64 mm x 3.15 mm)
Length with contact adaptor: 149 mm
Weight .35 Lb. (160 g)” to “6 ounces (160 g), including batteries
Country of Origin CHINA
Accessories Storage Case, Cone Adapter, Funnel Adapter, Master Wheel ( 6″) Contact adapter, three (3) AA Batteries, 25 reflective tapes, NIST Certificate, Instructions

DOWNLOADS

PLT-5000 Datasheet

PLT-5000 Instruction Manual